EBL 802 Model Smart Battery Charger for AA AAA 9V Ni-MH Ni-CD Rechargeable Batteries
EBL 802 is professional on AA, AAA 9V NI-MH/NI-CD rechargeable battery.
EBL-802 can charge 2 or 4 AA/AAA Ni-MH/Ni-CD batteries in pairs, and 1 or 2 pieces 9V Ni-MH/Ni-CD batteries individually.
Controlled by MCU, and using -△V pulse charging technology, prevent the charger from over-charge, over-discharge, over-current and over-heat.
Can be applied to supplied voltage globally.
Input: 100-240V AC 50/60Hz
Output: DC 2.4V 600-670mA for AA/AAA batteries, and for the 9V batteries, it’s 250mA when the voltage reach to 6-7V, 140mA when 8.4V, 30mA when 9.6V
Battery saturation charging rate: >80%
Unique Trickle Charge
Adopting -∆V intellectual cut-off charging method, automatically turn to trickle charge, overheat-detection to prevent over-charging, short circuit protection and reverse polarity protection.
* Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger.
* Never mix charge different type and different capacity of batteries under the same LED indicator.
* Using environment: 0℃ to 35℃, it is normal phenomenon that the battery is warmer than room temperature when charging.
* Do not disassemble or reassemble the charger by yourself for safety reason.
Mutifunctional AA AAA 9V Battery Charger – AC Input, Worldwide Usage
Retractable AC plug; slim profile; ideal for travel
■ Operating Temperatue: 0-30℃, Humidity: ≦80％
■ Storage Temperatue: 0-25℃, Humidity: ≦60％
■ Surface Temperatue of batteries when charging: ≦60℃
■ Surface Temperatue of charger when charging: ≦45℃
This battery charger is used for AA/AAA Ni-MH/Ni-Cd batteries, and 9V Ni-MH/Ni-Cd batteries.
The absolute 0V battery can not be charged.
Can not charge alkaline or carbon battery.
LED shows RED flashing light, easily helps you detcted all the bad batteries.
Keep Red: Charging status.
Keep Green: Fully charged.
Size: 3.94* 2.64* 1.65 inch
Weight： 2.65 oz.
1x EBL 802 Battery Charger
1x User Manual